Does Glycolysis Produce More ATP Than Aerobic Respiration? (2024)

Answer: No

Explanation: You have to be 18+ to change your name.

Answer:

no

Explanation:

nah, gotta legally b an adult bub. if u aint on3 u cant change yo name

With the melting of the icebergs, the surface of the sea gets a cooler temperature.

What happens when iceberg melts on the sea

When icebergs melt into the ocean, the surrounding seawater can be expected to cool down initially due to the addition of cold freshwater. This is because icebergs are made of freshwater, which is less dense than saltwater, and therefore floats on top of the seawater. When the ice melts, the freshwater will mix with the surrounding seawater, and the resulting mixture will be cooler than the original seawater.

However, the long-term effect of ice melting on sea-surface temperatures is more complex and depends on various factors. For example, the melting of large ice sheets such as those in Antarctica and Greenland can contribute to the rise in sea level and change ocean currents, which can affect heat transfer and ultimately alter sea-surface temperatures. In addition, the loss of reflective ice cover can result in more absorption of solar radiation by the ocean, leading to warmer sea-surface temperatures.

Learn more about icebergs here https://brainly.com/question/2232109

#SPJ1

(a) In terms of the initial mass M and the half-life h, the formula for the mass remaining after time t is as follows:

We obtain: by substituting the given values for M(t) = M * (1/2)(t/h).

M(t) = 50 mg * (1/2)(t/28 days)

(b) We substitute t=40 in the formula to determine the mass remaining after 40 days and evaluate:

M(40) = 50 mg * (1/2)(40/28) M(40) = 50 mg * 0.276 M(40) = 13.8 mg, which means that there is still 13.8 mg of mass after 40 days.

(c) The time t must be determined so that M(t) = 2 mg. When M=2 is added to the formula, we get:

2 mg equals 50 mg * (1/2) / (t/28) = 2/50 / (t/28) = 0.04 t/28 = log(0.04) / log(1/2) t/28 = 4.3219 When we multiply both sides by 28, we get:

t = 4.3219 * 28 t = 121.3064 days; consequently, the sample decays to a mass of 2 mg in approximately 121.3 days.

What is Initial Mass?

The mass of an object or substance at the beginning of a particular period or process is referred to as its initial mass. It is the starting point for measuring or calculating changes or transformations in the mass of the object or substance.

The initial mass, for instance, refers to the total mass of the two substances prior to the chemical reaction that results in the formation of a new compound. The new compound's total mass after the reaction is complete would be referred to as the final mass.

To know more about Initial Mass, visit:

https://brainly.com/question/28792400

#SPJ1

To find the concentration of calcium hydroxide in limewater, we need to use the balanced chemical equation and stoichiometry to determine the number of moles of calcium hydroxide that reacted with the hydrochloric acid.

From the balanced equation, we can see that 1 mole of calcium hydroxide reacts with 2 moles of hydrochloric acid. Therefore, the number of moles of calcium hydroxide in the limewater is:

moles of Ca(OH)₂ = (0.0400 mol/dm³) × (18.8 cm³ / 1000 cm³) × (1/2) = 0.00376 mol

a) The concentration of calcium hydroxide in mol/dm³ is:

concentration of Ca(OH)₂ = moles of Ca(OH)₂ / volume of limewater in dm³

We are given the volume of limewater as 25.0 cm³, which is equivalent to 0.025 dm³. Therefore,

concentration of Ca(OH)₂ = 0.00376 mol / 0.025 dm³ = 0.150 mol/dm³

b) The molar mass of calcium hydroxide is:

Ca(OH)₂ = (1 × 40.08 g/mol) + (2 × 16.00 g/mol) + (2 × 1.01 g/mol) = 74.10 g/mol

To convert the concentration from mol/dm³ to g/dm³, we need to multiply by the molar mass. Therefore,

concentration of Ca(OH)₂ = 0.150 mol/dm³ × 74.10 g/mol = 11.1 g/dm³

So, the concentration of calcium hydroxide in limewater is 0.150 mol/dm³ or 11.1 g/dm³.

The balanced chemical equation for the reaction is:

Ca(OH)₂(aq) + 2HCl(aq) → CaCl₂(aq) + 2H₂O(l)

From the equation, we see that one mole of Ca(OH)₂ reacts with two moles of HCl.

a) We can use the given information to calculate the number of moles of HCl that reacted with the Ca(OH)₂ in the 25.0 cm³ of limewater:

Number of moles of HCl = concentration × volume
Number of moles of HCl = 0.0400 mol/dm³ × 18.8 cm³/1000 cm³
Number of moles of HCl = 0.000752 mol

Since two moles of HCl react with one mole of Ca(OH)₂, we have:

Number of moles of Ca(OH)₂ = 0.000752 mol / 2
Number of moles of Ca(OH)₂ = 0.000376 mol

The volume of the limewater used is 25.0 cm³, which is equivalent to 0.0250 dm³. Therefore, the concentration of calcium hydroxide in the limewater is:

Concentration of Ca(OH)₂ = number of moles / volume
Concentration of Ca(OH)₂ = 0.000376 mol / 0.0250 dm³
Concentration of Ca(OH)₂ = 0.015 mol/dm³

Therefore, the concentration of the calcium hydroxide in the limewater is 0.015 mol/dm³.

b) To calculate the concentration of Ca(OH)₂ in g/dm³, we need to use the molar mass of Ca(OH)₂:

Molar mass of Ca(OH)₂ = 1 × 40.08 g/mol (for Ca) + 2 × 16.00 g/mol (for O) + 2 × 1.01 g/mol (for H)
Molar mass of Ca(OH)₂ = 74.10 g/mol

The mass of Ca(OH)₂ in 25.0 cm³ of limewater can be calculated using the number of moles we previously calculated:

Mass of Ca(OH)₂ = number of moles × molar mass
Mass of Ca(OH)₂ = 0.000376 mol × 74.10 g/mol
Mass of Ca(OH)₂ = 0.0279 g

The volume of the limewater used is 25.0 cm³, which is equivalent to 0.0250 dm³. Therefore, the concentration of calcium hydroxide in the limewater in g/dm³ is:

Concentration of Ca(OH)₂ = mass / volume
Concentration of Ca(OH)₂ = 0.0279 g / 0.0250 dm³
Concentration of Ca(OH)₂ = 1.12 g/dm³

Therefore, the concentration of the calcium hydroxide in the limewater is 1.12 g/dm³

There is 22.4 L in one mole

14 moles of CO2

1.25 moles of oxygen

What is the mole?

The mole is a unit of measurement used in chemistry to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains the same number of entities, such as atoms, molecules, or ions, as there are in 12 grams of carbon-12. This number is approximately 6.02 x 10^23 entities and is known as Avogadro's number.

If 1 mole of methane produces 2 moles of CO2

7 moles of methane will produce 7 * 2 /1

= 14 moles of CO2

If 2 moles of oxygen combusts 1 mole of methane

2.5 moles of oxygen will combust 2.5 * 1/2

= 1.25 moles

Learn more about mole:https://brainly.com/question/26416088

#SPJ1

Among the given objects i.e. a 1,500-kilogram truck, a 3-kilogram bag of rice, and a 0.4-kilogram book, A 400-kilogram roller coaster car has the greatest gravitational attraction towards the center of the earth.

The gravitational force is directly proportional to the mass of the object and inversely proportional to the square of the distance from the center of the earth. Since the 400-kilogram roller coaster car has the greatest mass, it will have the greatest gravitational attraction towards the center of the earth.

Following the 400-kilogram roller coaster car, 1,500-kilogram truck would have the second greatest gravitational attraction, followed by the 3-kilogram bag of rice, and lastly the 0.4-kilogram book.

All of the given objects experience a gravitational pull, however, the 400-kilogram roller coaster car has the greatest pull due to its mass and proximity to the center of the earth.

Therefore, option A is correct.

To know more about gravitational force here

https://brainly.com/question/30129547

#SPJ4

From the electromagnetic spectrum, when a target is shielded from a radioactive sample by a sheet of metal gamma rays can pass through the sheet of metal and hit the target.

What is electromagnetic spectrum?

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic spectrum,here:

https://brainly.com/question/23727978

#SPJ9

The gas that will produce a pressure of 1 atm when 13 grams of the gas is added to 10 L container at 300 K is oxygen gas

How do I determine the identity of the gas?

First, we shall determine the number of moles of the gas in the container. Details below:

Pressure (P) = 1 atmVolume (V) = 10 L Temperature (T) = 300 KGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) =?

PV = nRT

1 × 10 = n × 0.0821 × 300

10 = n × 24.63

Divide both sides by 24.63

n = 10 / 24.4658

n = 0.406 mole

Finally, we shall determine the identity of the gas by obtaining the molar mass of the gas. Details below:

Mole of gas = 0.406 moleMass of gas = 13 gramsMolar mass of gas =?

Molar mass = mass / mole

Molar mass of gas = 13 / 0.406

Molar mass of gas = 32 g/mol

Since the molar mass of the gas is 32 g/mol, we can conclude that the gas is oxygen gas

Learn more about molar mass:

https://brainly.com/question/25645713

#SPJ1

Hence, it takes two half-lives for a reactant's concentration to drop to 25% of its initial value.

What does chemistry's definition of concentration entail?

The amount of solute contained in a specific amount of solution is how concentrated a material is. The number of moles of solute in 1 L of solution, or molarity, is the standard unit of measurement for concentrations.

What is concentration, and what is an example of it?

You can determine how much solute has dissolved in the solvent by looking at the concentration of the solution. One teaspoon of salt per two cups of water, for instance, would be the concentration.

To know more about Concentration visit:

https://brainly.com/question/10725862

#SPJ1

The apple is not moving because it is acted upon by balanced forces.

What is a freebody diagram?

A free body diagram is a visual representation of the forces acting on an object in a particular situation. It is a way of isolating the object of interest and showing all of the external forces that act upon it, without including any of the internal forces that occur within the object itself.

In a free body diagram, the object is usually represented as a dot, and arrows are used to represent the direction and magnitude of each external force acting upon it. The size and direction of each arrow represents the strength and direction of the force, respectively. The arrows are labeled with the name of the force and its magnitude in appropriate units.

Learn more about freebody diagram:https://brainly.com/question/14390468

#SPJ1

C. Elastic artery is the type of conduit in the cardiovascular system designed to withstand the highest pressure.

The largest arteries in the body are elastic or conducting arteries, which are distinguished by their strong elasticity and capacity to tolerate the high pressure of blood flow from the heart.

Explain the cardiovascular system.All of the body's cells receive nutrition and oxygen through the cardiovascular system, which circulates blood.It is made up of the blood veins that run throughout the body and the heart. Blood is transported from the heart via the arteries and returned by the veins.What are the parts and duties of the cardiovascular system?To obtain oxygen into the blood, the circulatory system (cardiovascular system) pumps blood from the heart to the lungs. The remainder of the body receives oxygenated blood from the heart via arteries. Oxygen-depleted blood is returned to the heart by veins to restart circulation.

learn more about cardiovascular system here

https://brainly.com/question/946975

#SPJ1

Rosalind Franklin contributed significantly to the field of chemistry by providing crucial evidence for the structure of DNA.

Specifically, she used X-ray crystallography to create images of DNA that helped scientists understand its structure. Her work was critical to the discovery of the double helix structure of DNA, which is now considered one of the most important discoveries in biology. Franklin's contributions to chemistry and biology have had a lasting impact on the field and continue to be recognized and celebrated today. Despite the significance of her work, Franklin's contributions were initially overlooked and undervalued, and it was only after her death that she began to receive the recognition and credit she deserved.

If you need to learn more about Rosalind Franklin, click here

https://brainly.com/question/30512941?referrer=searchResults

#SPJ11

Considering the definition of pH, the value of the pH in the solution is 8.60

Definition of pH

pH is the Hydrogen Potential and it is a measure of acidity or alkalinity. It indicates the amount of hydrogen ions present in a solution or substance.

Mathematically, pH is calculated as the negative base 10 logarithm of the activity of hydrogen ions:

pH= - log [H⁺]= - log [H₃O⁺]

The numerical scale of pH includes the numbers from 0 to 14. The pH value 7 corresponds to neutral substances. Acidic substances are those with a pH lower than 7, while basic substances have a pH higher than 7.

pH in this case

In this case, you know that [H₃O⁺]= 2.5×10⁻⁹ M

You can replace this value in the definition of pH:

pH= -log (2.5×10⁻⁹ M)

Solving:

pH= 8.60

Finally, the pH has a value of 8.60

Learn more about pH:

brainly.com/question/3992824

#SPJ1

Interference from other metal ions: Different metal ions can produce similar flame colors, making it difficult to distinguish between them.

What is Flame Test?

A flame test is a qualitative analytical technique used to identify the presence of certain metal ions in a sample by observing the color of the flame produced when the sample is introduced into a flame. When certain metals are heated in a flame, they emit light in characteristic colors, producing a unique flame color that can be used to identify the metal ion present in the sample. The colors observed in the flame are due to the excited state of the metal ions and the energy released when the electrons return to their ground state.

There are several difficulties in identifying metal ions with a flame test:

Interference from other metal ions: Different metal ions can produce similar flame colors, making it difficult to distinguish between them.

Weak color intensity: Some metal ions produce weak flame colors that are difficult to observe, especially in bright lighting conditions.

Contamination of the sample: The presence of impurities in the sample can affect the flame color and make it difficult to identify the metal ion.

Learn more about Flame Test from given link

https://brainly.com/question/26873482

#SPJ1

According to the question, the Mg2+ ion is the smallest and hence has the highest lattice energy.

How is higher lattice energy located?

1. To start, consider the relative charges presented by each ion in a certain molecule; if one compound has much larger ionic charges, it is likely to have higher lattice energy. 2. To determine whether the charge differences across compounds are evident, calculate Q1 x Q2 for each compound and compare the results.

What types of energy are there in a lattice?

Example: The energy released when alternate lattices of Na+ and Cl- ions are formed in the NaCl crystal depicted in the image below is known as the lattice energy of NaCl. The Ionic chemicals have relatively high lattice energies.

To know more about lattice energy visit:

https://brainly.com/question/17149378

#SPJ1

The measurement that corresponds to constant pressure must be A and the measurement that corresponds to constant volume must be B.

What is combustion of fuels?

Combustion is a chemical process or a reaction between Fuel (Hydrocarbon) and Oxygen. When fuel and oxygen react it releases the heat and light energy.

Heat and light energy then result in the flame.

So, the formula for Combustion reaction is

Hydrocarbon + Oxygen = Heat energy.

Combustion is used in car motors and rocket engines and many other machineries.

The measurement that corresponds to constant pressure must be A, since some of the energy released must do work on the surroundings. Therefore, the measurement for constant pressure must be smaller than the measurement for constant volume.

This means that the measurement that corresponds to measurement B, the larger of the two, must be constant for constant volume because all of the energy transferred to the surroundings is in the form of heat.

Therefore, the measurement that corresponds to constant pressure must be A and the measurement that corresponds to constant volume must be B.

Learn more about Combustion of fuels, here:

https://brainly.com/question/13089893

#SPJ1

Answer:

1beehehdhhdhdhrhrhrehdhdhd

The concept Charles's law is used here to determine the new temperature of the gas if its is compressed to 10.0 mL. The new temperature is 4 K. The correct option is C.

What is Charles's law?

At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. Mathematically, the law can be expressed as:

V = Constant × T

or

V/T = Constant

For two different gases, the equation is:

V₁/T₁ = V₂/T₂

T₂ = V₂T₁ / V₁

= 10.0 × 20.0 / 50.0

= 4 K

Thus the correct option is C.

To know more about Charles's law, visit;

https://brainly.com/question/16927784

#SPJ1

The amount of current generated, given that the circuit offers 40 ohms resistance, and is connected to a 60 V supply is 1.5 A

How do I determine the current generated by the circuit?

The following data were obtained from the question given above:

Resistance (R) = 40 ohmsVoltage (V) = 60 V Current (I) =?

Ohm's law states as follow:

Voltage (V) = Current (I) × resistance (R)

Using the above formula, the current generated by the circuit can be obtained as follow:

Voltage (V) = Current (I) × resistance (R)

60 = Current × 40

Divide both sides by 40

Current = 60 / 40

Current = 1.5 A

Thus, the current generated in the circuit is 1.5 A (None of the options are correct)

Learn more about current:

https://brainly.com/question/23754329

#SPJ1

If we did not know the order of elusion for the gases, we would determine it experimentally by the process of chromatography separation technique.

Elution is a very important basic concept in chromatography separation techniques. It deals with the use of eluent in the removal of an adsorbate from an adsorbent. The principle behind Elution is just about how polar the solvent is.

Let us say if compound B will go with the Elution first because of its polarity. The main reason is that compound B has lesser polarity as compared to compounds A and B.

Another compound for example compound A will then elutes second because of its polarity too as resonance increases the polarity of the compound.

Last, let us take a compound C elutes because it has the highest polarity which is caused by electronegative atoms.

Learn more about chromatography:

brainly.com/question/11960023

#SPJ4

The pressure after the expansion inside the balloon can be calculated using Boyle's law. When the volume changes from 3.2 L to 3.6 L, pressure changes from 12 Pa to 10.6 Pa.

What is Boyle's law ?

Boyle's law states that at constant temperature, the volume of a gas is inversely proportional to the pressure of the gas.

hence, PV = a constant.

Let P1 and V1 be the initial pressure and volume and P2 and V2 be the final pressure and volume, then

P1 V1 = P2V2.

Given that,

P1 = 12Pa

V1 = 3.2 L

V2 = 3.6 L

P2 = P1 V1/V2

= 3.2 l × 12 Pa /3.6 L

= 10.6 Pa

Therefore, the final pressure of the gas inside the balloon will be 10.6 Pa.

Find more on Boyle's law:

brainly.com/question/1437490

#SPJ1

The change in the enthalpy of a chemical reaction that takes place under constant pressure is known as the Heat of Reaction.

What do you mean by the heat reaction ?

The quantity of heat that has to be supplied or withdrawn during a chemical reaction in order to maintain the same temperature for all the reactants is known as the heat of reaction, also known as the enthalpy of reaction.

It is a thermodynamic unit of measurement that may be used to determine how much energy is released or created per mole during a process.

Thus, the change in the enthalpy of a chemical reaction that comes at a constant pressure is called as heat of reaction.

To learn more about the heat of reaction, follow the link;

https://brainly.com/question/30464598

#SPJ1

The number of glucose molecules that can be seen in the solution will still be 9, but the concentration of glucose in the solution will decrease.

When 100 ml of water is added to the 200 ml solution containing 9 molecules of glucose, the volume of the solution will increase to 300 ml, but the number of glucose molecules will remain the same.

It is important to note that the concentration of the glucose molecules in the solution will decrease when the additional water is added.

The concentration of a solution is defined as the amount of solute (in this case, glucose molecules) divided by the volume of the solvent (in this case, water).

Before the additional water was added, the concentration of glucose was 9 molecules/200 ml. After the additional water is added, the concentration of glucose will be 9 molecules/300 ml.

So, to summarize, the number of glucose molecules in the solution will remain the same (9 molecules), but the concentration of the glucose molecules in the solution will decrease when the additional water is added.

To know more about concentration of solutions, refer here:

https://brainly.com/question/10720472#

#SPJ11

1) Lithium has one outermost electron

2) Sulfur has six outermost electrons

What is the number of electrons?

Since lithium has one valence electron, it is in the group 1. Because all of these elements combine to create oxides, which dissolve in water to produce alkali, the group is known as the alkali metals group. The elements in a group have similar chemical properties.

Sulfur is a member of group six. Sulfur exhibits valencies of 2, 4, and 6 because the d-orbital is vacant. It only needs two more electrons to complete its octet.

Learn more about sulfur:https://brainly.com/question/1478186

#SPJ1

Order from largest to smallest according to the charge held on the positive plate

Capacitor with A=2cm^2 and C=8nFCapacitor with A=2cm^2 and C=4nFCapacitor with A=4cm^2 and C=2nFCapacitor with A=8cm^2 and C=2nFCapacitor with A=1cm^2 and C=1nF and Capacitor with A=4cm^2 and A=1cm2 and C=1nF capacitors and A=4cm2 and C=1nF capacitors (these capacitors are equivalent in terms of the charge stored on the positive plate).

CapacitorsA capacitor's capacitance and the voltage applied across it determine how much charge is kept on its positive plate. We can order the capacitors according to their capacitance, with larger capacitance capacitors storing more charge, presuming that all capacitors have the same voltage applied across them.The capacitor with A=2cm2 and C=8nF will therefore store the greatest charge on the positive plate, followed by the capacitor with A=2cm2 and C=4nF, and so forth. The capacitors with A=1cm2 and C=1nF and A=4cm2 and C=1nF are equivalent in this ranking because capacitors with equivalent capacitances will store the same amount of charge.What purpose does a capacitor serve?

a capacitor is an electrical energy storage device that consists of two conductors that are isolated from one another and placed near to one another.

A straightforward illustration of one such storage device is a parallel-plate capacitor.

What are a capacitor and its component?

The dielectric constant of the material separating the plates has an impact on capacitance as well. The farad is the abbreviation for the unit of capacitance. This is a big unit; smaller ones are the picofarad and microfarad (1 pF = 10-12 F and 1 F = 10-6 F, respectively).

learn more about capacitors here

https://brainly.com/question/29521436

#SPJ1

Answer:

CH3(CH2)3COOH

Explanation:

Answer:

CH3(CH2)3COO- + H+

Explanation:

The dissociation of valeric acid (CH3(CH2)3COOH) can be represented by the following equation:

CH3(CH2)3COOH ⇌ CH3(CH2)3COO- + H+

In this equation, valeric acid (CH3(CH2)3COOH) donates a hydrogen ion (H+) to water (H2O) to form a hydronium ion (H3O+), while the valerate ion (CH3(CH2)3COO-) is formed as a result of the loss of the hydrogen ion.

The dissociation of valeric acid can also be expressed using an equilibrium constant (Ka), which is a measure of the acidity of the acid. The expression for Ka for valeric acid is:

Ka = [CH3(CH2)3COO-][H+] / [CH3(CH2)3COOH]

In this expression, [CH3(CH2)3COO-] represents the concentration of the valerate ion, [H+] represents the concentration of the hydronium ion, and [CH3(CH2)3COOH] represents the concentration of valeric acid.

The value of Ka for valeric acid is approximately 1.5 x 10^-5 at room temperature (25°C).

For more information about molecular formula refers to the link: https://brainly.com/question/28647690

#SPJ11

The concentration of the solution is 11.79 mol/L (or 11.79 M) of MgCl2.

How is a compound's molar mass calculated?

The following steps should be followed in general to determine a compound's molar mass:

Indicate the number of each type of atom in the molecule when writing the compound's chemical formula.

Get the atomic mass of each element by consulting the periodic table.

The atomic mass of each element is multiplied by the quantity of that element's atoms in the molecule.

Add up the products from step 3 to get the total molar mass of the compound.

To determine the concentration of a solution, we need to know the amount of solute (in grams) and the volume of the solution (in liters).

First, we need to convert the volume of the solution from milliliters (mL) to liters (L):

18 mL = 18/1000 L = 0.018 L

Next, we need to calculate the concentration of MgCl2 in the solution:

concentration = amount of solute / volume of solution

In this case, the amount of solute is 20.2 grams of MgCl2. We can use the molar mass of MgCl2 to convert from grams to moles:

molar mass of MgCl2 = 95.21 g/mol

moles of MgCl2 = 20.2 g / 95.21 g/mol = 0.2122 mol

Now we can calculate the concentration:

concentration = 0.2122 mol / 0.018 L

concentration = 11.79 mol/L

To know more about molar mass, visit:

https://brainly.com/question/22997914

#SPJ1

Based on the given statements, Student 1 employs correct scientific reasoning.

How the best answer was determined

Based on the given statements, Student 1 employs correct scientific reasoning by explaining a possible source of error in terms of the physical properties of the system. They suggest that if the spot was placed below the solvent level, the sample would be dissolved into the solvent pool before it could travel up the plate, leading to inaccurate results. This is a valid explanation based on the principles of chromatography and the physical behavior of the sample and solvent.

Student 2 also provides a valid explanation based on the principle of polarity, but they do not specify how this might lead to unequal movement of the sample on the TLC plate.

Student 3's statement, on the other hand, does not provide a clear explanation of how closing the developing chamber too quickly might affect the outcome of the lab, and it does not demonstrate a clear understanding of the scientific principles involved.

Therefore, based on the given statements, Student 1 employs correct scientific reasoning.

Learn more about solvents here https://brainly.com/question/25326161

#SPJ1

Answer:

a. X is Na, Y is Mg, Z is Al

b. 2Na + 2H2O = 2NaOH + H2

c. 2Al + 3Cl2 = 2AlCl3

Explanation:

The third period contains eight elements: sodium, magnesium, aluminium, silicon, phosphorus, sulfur, chlorine and argon.

a. X is Na, Y is Mg, Z is Al because X, Y, Z are all metals

b. 2Na + 2H2O = 2NaOH + H2

c. 2Al + 3Cl2 = 2AlCl3